The TN-4D uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.
In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)
As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.
The TN-4D comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.
The TN-4D comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.
In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.
A USB port on the back panel delivers CD-quality digital audio to your PC/Mac, allowing you to record/archive your vinyl in a high quality, digital audio format. Once you have archived your vinyl to digital, it’s a simple matter to listen to them while out and about, via a smartphone/portable audio player, or in your car (by burning them onto a CD-R or transferring them to a memory card/stick).
And to ensure pristine signal transfer, gold-plated PHONO/LINE output terminals are employed to prevent analog audio signals from losing quality as a result of oxidation.
The TN-4D supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.
|Motor||Brush-less DC Motor|
|Rotation Speeds||33-⅓ rpm, 45 rpm|
|S/N Ratio||67dB or higher (A-weighted, 20kHz LPF)|
|Needle Pressure Range||0g to 5.0g|
|Compatible Cartridge Weight||4.0g to 13.0g
14g to 23g (including Head-shell)
|Head-shell and Cartridge sections|
|Type||MM-type (SUMIKO Oyster factory installed)|
|Output Voltage||4.0mV (1kHz)|
|Needle Pressure||1.5 to 2.5g (appropriate value: 2.3g)|
|Head-shell weight||10g (including nuts, screws, and wires)|
|Compatible Stylus||Styluses for SUMIKO Oyster|
|Connector||RCA Pin jack × 1 pair (PHONO/LINE switchable)|
|Connector||USB B-type (DC 5V 100mA USB Bus power required)|
|Audio Format||PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz, 16bit|
|Operating Power||AC 100 to 240V, 50/60Hz|
|Standby Power||0.5W or less|
|Overall Dimensions (W×H×D)||420 × 117 × 356 mm /
16.5" × 4.6" × 14.0"
|Weight||Approx. 6.1kg / 13.5 lbs.|
|Included Accessories||Felt Mat, EP Adapter, Counter Weight, Head-shell (SUMIKO Oyster installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE036W-24015), Owner's Manual (including Warranty Card)|
Sản phẩm chính hãng Cam kết sản phẩm nguồn gốc rõ ràng
Miễn phí vận chuyển Áp dụng cho đơn hàng trên 20 triệu và trong khu vực nội thành
Hỗ trợ lắp đặt tận nơi Áp dụng cho đơn hàng trong khu vực nội thành
Giao hàng nhanh chóng Giao hàng, lắp đặt chuyên nghiệp
Uy tín hàng đầu Sản phẩm độc quyền
Miễn phí vận chuyển Nội thành TP.Hồ Chí Minh
Giao hàng tận nơi Thu tiền tận nhà
Thanh toán linh hoạt Thanh toán sau (COD)