LUXMAN SQ-N150

Thương hiệu:

566Lượt xem 0Bình luận

98.000.000 đ

VACUUM TUBE AMPLIFIERS

SQ-N150

Music reproduction of uncanny warmth and beauty

Kích thước:297(W) x 188(H) x 251(D) mm

Trọng lượng:12.4kg/Cái

Bảo hành:12 tháng

Số lượng đặt mua:

Mua hàng ngay

Tư vấn sản phẩm

Giao hàng nhanh
Từ 1 - 3 ngày
Miễn phí vận chuyển
Đơn hàng trên 20 triệu
Bảo hành
Chính hãng
Thanh toán dễ dàng
Với nhiều hình thức

Chi tiết sản phẩm

Meticulous vacuum tube engineering

You’ll enjoy surpassingly detailed, open music reproduction thanks to the exceptional linearity of LUXMAN’s P-K split phase inversion circuit. We married an input stage of two JJ Electronic ECC83 miniature double triodes to a push-pull output with four JJ Electronic EL84 pentodes. And with our deep knowledge of tube design, we configured the SQ-N150 for consistent performance and long operating life. On paper, we rate power output at 10 Watts + 10 Watts at 6 ohms. In practice, the sound is fit for the most demanding listeners.

Versatile preamplifier

LUXMAN provides three line inputs and a phono section that accommodates both moving magnet and moving coil cartridges, so you don’t need to purchase a separate MC preamp. We plated the RCA jacks in gold and pitched them at 18 mm to accommodate high-end cables. For minimum crosstalk between left and right channels, we used the same input selector IC as on our top-of-the-line C-900u control amplifier. For ultimate sonic purity, the Line Straight mode can bypass the Bass, Treble and Balance controls. The headphone output jack is ideal for late night listening.

Remote control

The aluminum-finished remote control operates volume as well as a LUXMAN CD player, such as the matching LUXMAN D-N150 digital player.

Elegant design

The 5 mm thick aluminum chassis has a modest “A4” footprint, just 210 x 297 mm (8-1/4 x 11-3/4 inches), not including projecting parts. The blasted white inish contrasts nicely with the hairlines on the machined aluminum controls. The orange LED lighting of the analog level meters provides a visual counter-point to the glow of the vacuum tubes.

Dimension

Speaker terminal (a) : 14.5mm or less
Supported Y-lug terminal (b) : 7.5mm or more
*Connection may not be performed depending on the shape of the Y-lug terminal.

Specifications

Rated output	10W+10W(6Ω)
Input sensitivity/ input impedance	PHONO (MM): 3.0mV/47kΩ PHONO (MC): 0.33mV/100Ω LINE: 180mV/47kΩ
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 80kHz (within -3.0dB)
Total harmonic distortion	1% or less (1kHz, 10W/6Ω)
S/N ratio (IHF-A)	PHONO (MM): 84dB or more PHONO (MC): 64dB or more LINE: 95dB or more

Circuit	Driver :P-K split phase inversion circuit Output :Pentode power tubes
Vacuum tubes	ECC83×2, EL84×4
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	98W
External dimensions	297(W) x 188(H) x 251(D) mm 20mm front panel knob of and 21mm rear panel terminals are included in the depth measurement
Net weight	12.4kg (main unit)
Accessories	Remote control (RA-25), Power cable